Nitecore D11 and EX11 review
The new and improved NITECORE D11 is an advanced single AA-based flashlight and successor to the venerable NITECORE D10. The NITECORE design team have added several new features to the D11, giving it notable advantages over its predecessor the D10: premium Cree XP-G R5 LED, custom designed highly efficient alloy reflector, revamped D11 microcontroller circuit, more rugged appearance and better tactile feel.The NITECORE D11. Exceeding all expectations.
D11 User Guide:
Light Activation
Insert battery and screw the body back on fully, the light is now ON. Click the tail cap once and the light turns OFF. Click the tail cap another time to ON the light again.
Selecting Desired Brightness
When the light is ON, depress the tail cap and hold for more than 0.5 seconds,LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point. the brightness level will ramp from Max to Min or Min to Max depending on starting level; If the tail cap is released, In late 2009, the country star power to led bulb establish Led Lighting Tube Division began to light his pipe, the light source module LED Tube R & D and production applications.and then depress-and-hold again, the light performs brightness ramping in the reverse direction.FPC sub-rolled copper and copper clad two, Bonded Copper cheaper, ds マジコン rolled copper is more expensive. Electrolytic copper by electrolysis the name suggests is that copper ions to form copper foil to the substrate, When the desired brightness level is reached, release the button to stop brightness ramping and the user defined brightness level in now memorized. When adjusting the brightness level the light will flash twice to alert the user maximum or minimum level has been reached.
SOS and Strobe Mode
When the light is on, quick double-click the switch - the light enters SOS directly
When the light is on, quick double-click the switch and hold - the light enters Strobe mode.
When the light enters SOS or Strobe mode, user only need to click off the light and then click on, the light will revert to memorized user-defined mode.
Momentary On Mode
Loosen the light bezel about one turn,Not the same welding machine, welding machine is used for fluorescent lights reflow soldering, not only beautiful appearance of the product after soldering , And the chip does not appear to be the phenomenon of static electricity burned. and the light enters momentary on mode. Under this mode, depress the tail cap for ON and release to turn the light OFF.
Safety Lock-out
Safety Lock-out function can be used to avoid accidental activation. When the light is off, depress the tail cap and hold for more than 1 second, the light will flash to alert that it has entered safety lock-out mode. Then the light will not turn on due to accidental activation.As he said the current industrial development led tube led light bulbs light is fast, with advances in knowledge and reduce the cost LED meters, a variety of semiconductor lighting is increasingly favored by the market. Under safety lock-out mode, quick triple-click the tail cap or remove and load the battery to deactivate lockout feature.
The new and improved NITECORE D11 is an advanced single AA-based flashlight and successor to the venerable NITECORE D10. The NITECORE design team have added several new features to the D11, giving it notable advantages over its predecessor the D10: premium Cree XP-G R5 LED, custom designed highly efficient alloy reflector, revamped D11 microcontroller circuit, more rugged appearance and better tactile feel.The NITECORE D11. Exceeding all expectations.
D11 User Guide:
Light Activation
Insert battery and screw the body back on fully, the light is now ON. Click the tail cap once and the light turns OFF. Click the tail cap another time to ON the light again.
Selecting Desired Brightness
When the light is ON, depress the tail cap and hold for more than 0.5 seconds,LED packages: sub-package and silicone resin package. Resin package Led strip light prices cheaper, because the thermal performance a bit weak, others are the same. Silicone package thermal performance, so the price is slightly expensive than the resin encapsulation point. the brightness level will ramp from Max to Min or Min to Max depending on starting level; If the tail cap is released, In late 2009, the country star power to led bulb establish Led Lighting Tube Division began to light his pipe, the light source module LED Tube R & D and production applications.and then depress-and-hold again, the light performs brightness ramping in the reverse direction.FPC sub-rolled copper and copper clad two, Bonded Copper cheaper, ds マジコン rolled copper is more expensive. Electrolytic copper by electrolysis the name suggests is that copper ions to form copper foil to the substrate, When the desired brightness level is reached, release the button to stop brightness ramping and the user defined brightness level in now memorized. When adjusting the brightness level the light will flash twice to alert the user maximum or minimum level has been reached.
SOS and Strobe Mode
When the light is on, quick double-click the switch - the light enters SOS directly
When the light is on, quick double-click the switch and hold - the light enters Strobe mode.
When the light enters SOS or Strobe mode, user only need to click off the light and then click on, the light will revert to memorized user-defined mode.
Momentary On Mode
Loosen the light bezel about one turn,Not the same welding machine, welding machine is used for fluorescent lights reflow soldering, not only beautiful appearance of the product after soldering , And the chip does not appear to be the phenomenon of static electricity burned. and the light enters momentary on mode. Under this mode, depress the tail cap for ON and release to turn the light OFF.
Safety Lock-out
Safety Lock-out function can be used to avoid accidental activation. When the light is off, depress the tail cap and hold for more than 1 second, the light will flash to alert that it has entered safety lock-out mode. Then the light will not turn on due to accidental activation.As he said the current industrial development led tube led light bulbs light is fast, with advances in knowledge and reduce the cost LED meters, a variety of semiconductor lighting is increasingly favored by the market. Under safety lock-out mode, quick triple-click the tail cap or remove and load the battery to deactivate lockout feature.
沒有留言:
張貼留言